Product Details

Classic gloss and flat finishes for any application, with superior protection and colour presentation
Subtle, low-sheen satin finish for a rich and dynamic decorative look
Interior and exterior use

Specifications

Recommended For Use On Plastic*, wood, metal, concrete, aluminum, wicker, masonry, fiberglass. (*Polyethylene plastics may resist adhesion, test first.) Key Feature(s) Premium all-surface, durable spray paint with built-in paint & primer. Rust-preventive. Any-angle spray, including upside down. Comfort-grip trigger to reduce fatigue. Interior/Exterior Interior / Exterior Resin Type Modified Alkyd Pigment Type Varies by colour Solvents Acetone, Ketone Blend MIR (Max Incremental Reactivity) Gloss: 0.95 • Satin: 0.80 • Matte: 0.80 Fill Weight 340 g (12 oz) Recommended DFT (Dry Film Thickness) 1.0–2.0 mils (25–50 µm) Coverage (Sq. Ft./Can) 10–15 sq. ft. (0.9–1.4 m²) assuming 15% loss Dry Time (70–80°F, 50% RH) Touch: 30 min • Handle: 1 hour • Recoat: Within 1 hr or after 48 hrs Full Dry Time 24 hours Application Temp Range 50–90°F (10–32°C); humidity < 65% Application Method Aerosol spray. Hold 8–12" (20–30 cm) from surface. Apply two+ light coats a few minutes apart. Keep can in motion. Not For Use On Galvanized steel, or surfaces exceeding 200°F (93°C) Clean Up Xylene or Mineral Spirits. Wipe tip after use. Do not burn or crush empty can Flash Point -156°F (-104°C). Extremely flammable Dry Heat Resistance 200°F (93°C) Shelf Life 5 years (unopened) Limitations Outdoor application recommended. Avoid windy/dusty conditions. Heavy coats may cause runs or wrinkling.