ZINSSER® Odour Killing Primer Clear Water-Based Primer-Sealer

Product Details

Zinsser Odour Killing Primer is a low odour, water-based primer that kills existing odours on interior surfaces. It applies white and dries fast to a clear, low sheen finish to permanently seal in odours. Odour Killing Primer is designed to eliminate difficult existing odours from pets (including urine), food, cigarette and cigar smoke, fire and smoke damage. Odour Killing Primer is compatible with all clear finishes and paints, both water and oil based.

• Suitable for use on all painted or unpainted interior surfaces such as wood floors, cabinets,
• walls and ceilings, including drywall, cured plaster, masonry, metal and PVC
• Applies white, dries clear
• Compatible with all paints and clear finishes
• Low odour formula dries in 45 minutes

Specifications

Regular (Water-Based) Aerosol Spray (Solvent-Based) Recommended For Use On Interior walls, ceilings, drywall, plaster, masonry, wood, and previously painted surfaces. Ideal for eliminating residual odors on porous surfaces. Same uses, plus spot-priming, hard-to-reach areas, and quick repairs. Best for localized odor issues. Key Feature(s) Low-odor, water-based formula designed to seal and block persistent odors (pets, food, smoke, fire, musty smells). Fast drying. Shellac/solvent-based aerosol that seals even stronger odors (smoke, fire damage, cigar/cigarette odor, pet urine). Very fast drying. Interior/Exterior Interior Interior Resin Type Water-Based Acrylic Resin Shellac-Based Acrylic Resin Blend Product Type Waterborne Odor-Blocking Primer High-Output Solvent-Based Odor-Blocking Aerosol VOC Range 3 g/L High VOC (solvent aerosol) (typical aerosols < 550 g/L) Odor Blocking Strength Strong. Everyday odors (pets, food, mildew, light smoke). Very Strong. Severe odors (fire smoke, pet urine, nicotine, musty odors). Fill Weight Quart / Gallon sizes 305697 Aerosol — ~340 g Appearance White liquid White aerosolized mist Coverage 350–400 sq. ft./gal 8–12 sq. ft./can Dry Time Touch: 30–60 min • Recoat: 1 hr Touch: 10–20 min • Recoat: 30 min Full Cure 7 days 1–3 days Application Temp Range 50–90°F 50–90°F Application Method Brush, roller, or spray (airless) Aerosol spray; any-angle spray system Clean Up Soap & water Mineral spirits / xylene; clean nozzle by spraying upside down Flash Point > 200°F (non-flammable) Extremely flammable (Flash point: -104°F / -76°C) Odor Mild Strong solvent odor Sheen / Finish Flat Flat Shelf Life 5 years (unopened) 5 years (unopened) Topcoat Compatibility Latex or oil-based paints Latex or oil-based paints Best For Whole-room odor sealing, walls & ceilings after cleaning, pet odor remediation. Heavy smoke/fire damage, small odor hotspots, quick patch priming. Limitations Not for exterior use; do not freeze. Extremely flammable aerosol; use only with ventilation. Not for large-area spraying.

 

SDS

SAFETY DATA SHEETS 

Colour Safety Data Sheets (SDS) ZINSSR 5-GL ODOR KILLING PRIMER ZINSSR 1-GL 2PK ODOR KILLING PRIMER ZINSSR QT 4PK ODOR KILLING PRIMER ZINSSR SSPR ODOR KILLING PRIMER

 

TECHNICAL DATA SHEETS

• Odor Killing Primer Technical Data Sheet