130+ independent retailers in Toronto•Shop local, keep 6 times more money in our community
Categories
DIYHardwarePaintPantryCleaning Supplies
Benjamin Moore HP | High Performance Quick Dry Acrylic Spray DTM Gloss (HP3000)
$99.99
Sold by: Fargo Paints
842 Danforth Ave, Toronto, ON M4J 1L7
Product Details
Quick Dry Acrylic Spray DTM is an extremely durable, UV-resistant, acrylic enamel that provides superior adhesion and maximum durability. Formulated for interior or exterior use on a variety of surfaces, including ferrous and non-ferrous metal, concrete, masonry, wood, and drywall. Quick-Dry Acrylic Spray DTM can also be used in dry-fall applications. Spray application preferred.
- Fast dry solution for OEM and factory applications
- For wood, metal, and masonry surfaces
- Hard scratch - and impact resistant coating
- View the additional tools for more information
Specifications
Recommended For Use On Ferrous and non-ferrous metal surfaces such as machinery, railings, doors, equipment, and structural steel. Ideal for on-site touch-ups and industrial maintenance where fast dry and spray application are needed. Key Feature(s) Direct-to-metal (DTM) acrylic enamel formulated for quick drying, corrosion resistance, and long-term durability. Provides excellent gloss and color retention with easy aerosol application. Interior/Exterior Interior / Exterior Resin Type 100% Acrylic Pigment Type Titanium Dioxide Volume Solids (±2%) 35 ± 2% Coverage (Sq. Ft./Can) 8–10 sq. ft. (0.7–0.9 m²) per 340 g spray can Recommended Film Thickness (mils) Wet: 3.0–4.0 • Dry: 1.0–1.5 Dry Time (77°F, 50% RH) Touch: 10–15 min • Handle: 30 min • Recoat: Anytime after 1 hr Full Cure (Days) 3–5 days Application Temp Range (°F) 50–90 Application Method Aerosol spray (shake well, hold 8–12" from surface, apply multiple light coats). Clean Up Xylene or HP7000 Urethane Reducer Flash Point -156°F (-104°C) Sheen / Gloss (@60°) Gloss (85+) Weight per Gallon Equivalent 7.0–7.5 lbs (0.84–0.90 g/cm³) VOC Range < 400 g/L (Aerosol formulation) Dry Heat Resistance 200°F (93°C) Adhesion (ASTM D3359) Pass 5B Flexibility (ASTM D1737) Pass ¼” (6.35 mm) Mandrel Corrosion Resistance (ASTM B117) 200 hrs (Rating 10, Rust 0%) Chemical Resistance (Non-Immersion) Excellent: Fresh Water, Salt Water • Good: Fuels, Mild Acids, Alkalis Primer Recommendations Self-priming on clean, properly prepared ferrous and non-ferrous metals. For added corrosion resistance, use HP1100 Acrylic Metal Primer. Compliance / Certifications VOC Compliant ✓ CFIA Approved ✓ MPI #141 ✓ Limitations For light industrial and maintenance use. Not for immersion, constant high-heat, or structural steel in severe service. Apply only between 50°F–90°F. Storage Temp (°F) 40–90 Shelf Life 2 years (unopened aerosol) Available Colours White (01)